Turn your business logo into a premium custom LED backlit 3D metal business sign with a dimensional logo layer, personalized backplate, and professional halo illumination designed to stand out day or night.
Each sign is precision laser-cut from heavy-duty 14-gauge American-sourced cold-rolled steel and built with a layered construction that creates real depth between your logo and backplate. Integrated commercial LED lighting adds a clean glow around the design, making this illuminated business sign an eye-catching choice for storefronts, office reception areas, corporate lobbies, restaurants, salons, clinics, retail spaces, and other customer-facing environments.
3D Dual-Layer Logo and Custom Backplate
The dimensional construction combines a separate front logo layer with a custom metal backplate rather than placing your artwork on a single flat panel.
This creates visible depth and separation between the two layers, helping your logo stand out while giving the finished sign a more architectural appearance.
The front logo and backplate can also use different colors, allowing you to introduce contrast between the layers or coordinate both surfaces with your existing brand identity.
LED Halo Backlighting
Integrated LED lighting illuminates the layered metal design and creates a glow around your business logo and backplate.
The lighting becomes especially noticeable in lower-light environments, allowing the sign to work as a dimensional metal logo during daylight hours and an illuminated branded feature after dark.
The LED light color can be selected along with your front sign and backplate colors so the complete display can be coordinated with your company branding and installation environment.
Heavy-Duty 14-Gauge Cold-Rolled Steel
Your custom LED business logo sign is fabricated from heavy-duty 14-gauge American-sourced cold-rolled steel.
Cold-rolled steel provides a smooth and consistent surface for precision cutting and finishing while offering the rigidity needed for professional dimensional signage.
Like other carbon steels, cold-rolled steel can still corrode if its protective coating becomes damaged or raw metal remains exposed. The finished sign therefore relies on its professional coating system, proper installation, and routine care for long-term protection.
Precision Laser-Cut From Your Logo
Your sign is created from your existing company logo, wordmark, lettering, or supplied business artwork rather than recreated with a stock typeface.
Precision laser cutting allows the metal components to follow the recognizable proportions, lettering, and graphic details of your supplied design.
Very fine details, enclosed letters, or disconnected elements may require minor bridging, stenciling, thickening, or other fabrication adjustments. Any required changes will be shown on your digital proof before production.
Powder-Coated Finish With 100+ Color Options
The steel receives a professional electrostatic powder-coated finish with a protective clear topcoat.
This coating helps protect the metal from everyday scratching, chipping, moisture, fading, and environmental exposure while creating the polished appearance expected from premium commercial signage.
Choose from more than 100 available powder coat colors for your front logo and backplate to coordinate the finished sign with your business identity, office interior, storefront, or architectural space.
Customize the Front, Backplate, and Lighting
The layered construction gives you several ways to coordinate the sign with your brand.
- Front logo color
- Backplate color
- LED light color
- Available sign size or size profile
- Available shape
- Indoor or outdoor use
- Wall type
- Mounting requirements
- Layout and fabrication notes
- Your existing business logo or artwork
Using contrasting colors between the front logo and backplate can make the dimensional separation more visible, while coordinated tones can create a subtler branded appearance.
The Wall Behind Your Sign Matters
Because backlighting interacts with the surrounding surface, the final illuminated appearance can vary depending on the wall color, texture, mounting distance, and ambient lighting.
Light-colored and relatively smooth walls generally reflect more light, while dark or heavily textured surfaces may produce a more subtle glow.
Providing your wall type and installation details during personalization helps House Sensations Art understand how the sign will be displayed.
Made in the USA
Your custom LED backlit metal logo sign is designed, laser-cut, finished, assembled, and prepared by House Sensations Art in Wedowee, Alabama.
Recommended Use
This dimensional illuminated business sign is designed for professional spaces where the company logo is intended to become a focal point rather than simple identification signage.
- Storefront entrances and exterior business walls
- Office reception areas
- Corporate lobbies and headquarters
- Branded feature walls
- Restaurants, cafés, and bars
- Hotels and hospitality spaces
- Salons, spas, and wellness businesses
- Medical and professional clinics
- Retail stores and showrooms
- Conference and meeting spaces
- Commercial interior design projects
- Appropriate exterior business installations
It is also well suited for new business openings, storefront launches, office renovations, corporate rebrands, franchise locations, reception upgrades, hospitality openings, retail renovations, new headquarters, and other projects where illuminated branding is intended to make a stronger visual impression.
Product Specifications
-
Material: Heavy-duty 14-gauge American-sourced cold-rolled steel
-
Construction: Dimensional dual-layer front logo and custom backplate
-
Cutting: Precision laser-cut from your supplied business artwork
-
Finish: Industrial electrostatic powder coat with protective clear topcoat
-
Metal Colors: More than 100 available powder coat color options
-
Lighting: Commercial-grade LED backlighting
-
LED Rating: IP68-rated lighting components
-
Power: 110V plug-and-play connection
-
Mounting: Stainless-steel standoff mounting system
-
Included: Custom layered LED sign, applicable standoff mounting hardware, and physical mounting template
-
Customization: Size, front logo color, backplate color, LED light color, wall type, artwork, and project details
-
Use: Indoor and appropriate outdoor commercial applications
-
Origin: Made in Wedowee, Alabama, USA
Standoff Mounting for Added Depth
Stainless-steel sign standoffs are included to position the completed sign away from the mounting surface.
The standoff system adds another level of dimensional depth while providing space behind the assembly for the lighting effect.
A physical mounting template is also included to help position the sign and identify the required mounting locations accurately.
The appropriate wall anchors or building-side fasteners depend on your specific wall material and installation conditions and should be selected accordingly.
Plan Your Power Location Before Installation
The LED lighting uses a 110V plug-and-play power connection designed for use with an appropriate standard outlet.
Before installing the sign, confirm the location of your power source and determine how the electrical cord will reach it.
The current product information also specifies a 5-foot 110V power cord, so the intended outlet position and cable route should be considered before the final mounting location is established.
If concealed wiring or modifications to permanent building electrical systems are needed, use properly rated components and qualified electrical assistance as required by your installation.
Outdoor Electrical Protection
The LED lighting components are IP68 rated for indoor and outdoor applications, but that rating should not be interpreted as making every part of the electrical system waterproof.
For exposed exterior installations, the plug and electrical connection must be protected using an appropriate waterproof covered junction box, weatherproof receptacle, or comparable exterior-rated solution positioned near or behind the sign.
Exterior electrical circuits, concealed wiring, or changes to permanent building wiring should be handled according to applicable electrical requirements.
Artwork Requirements
Upload a high-resolution version of your existing business logo or artwork directly on the product page.
Accepted file formats include AI, DXF, PNG, JPG, EPS, SVG, and PDF.
Vector artwork is preferred whenever available because it gives the design team the greatest flexibility when preparing your logo for precision fabrication. High-resolution raster artwork should be supplied at approximately 300 DPI where applicable.
This product is intended to reproduce an existing logo or graphic rather than provide a completely new brand identity or logo design from scratch.
How to Order Your Custom LED Backlit 3D Sign
Step 1: Select Your Size
Choose your preferred sign size or size profile from the available product options.
Step 2: Complete “Personalize This Item”
Fill out the required customization fields, including your front sign color, backplate color, LED light color, indoor or outdoor use, wall type, mounting details, project notes, digital proof terms, and contact email.
Step 3: Upload Your Logo
Upload your high-resolution business artwork directly on the product page. AI, DXF, PNG, JPG, EPS, SVG, and PDF files are accepted.
Step 4: Review Your Selections
Confirm your size, colors, lighting preferences, wall information, customization details, and uploaded logo before adding the item to your cart.
Step 5: Add to Cart and Complete Checkout
Once all required information is correct, add your customized sign to the cart and complete your order so the design can move into the proof process.
Digital Proof and Approval
A digital proof will be sent within approximately 1–4 business days so you can review the proposed layout before fabrication begins.
The proof allows you to confirm your logo proportions, front and backplate relationship, colors, overall design, and any fabrication adjustments required for the metal construction.
Standard stenciling or bridging may be added where necessary for laser cutting.
Please review and respond within 7 days. Production remains on hold while House Sensations Art waits for your approval, which may affect the estimated shipping date.
If no response is received within the approval window, the default proof may be moved into production according to the current proof policy.
How to Install Your LED Backlit Business Sign
Step 1: Confirm the final wall location, wall material, power source, and intended cord route.
Step 2: Position the supplied physical mounting template and mark the appropriate mounting locations.
Step 3: Install anchors or fasteners appropriate for your wall material and sign configuration.
Step 4: Install the stainless-steel standoff bases.
Step 5: Position and secure the custom layered metal sign to the standoff system.
Step 6: Route the power cord safely to the appropriate 110V connection.
Step 7: Connect the lighting and confirm that the completed sign is secure and operating correctly.
Drywall, wood, brick, concrete, masonry, tile, exterior cladding, and other wall types may require different anchors and installation techniques.
Production and Shipping
Each custom LED backlit 3D business logo sign is made to order in Wedowee, Alabama.
Production begins after the required digital proof process is complete. Current custom-sign processing is approximately 14–21 business days plus transit, although the live product page contains some older timeline information in separate legacy sections.
Responding promptly to your proof helps prevent avoidable delays to the overall production schedule.
Local pickup is available from the House Sensations Art facility in Wedowee, Alabama and is generally available according to the current pickup status shown on the product page.
Large or oversized configurations may require different shipping arrangements depending on the selected dimensions and destination.
Care and Important Order Notes
All Sales Are Final: Because each LED sign is custom fabricated to your artwork and selections, orders are non-refundable and cannot be canceled, returned, exchanged, or downsized once processing begins. Size upgrades may be possible subject to availability and payment of any applicable difference.
LED Protection: IP68 applies to the LED lighting components. The power plug, electrical adapter, receptacle, and connection point still require suitable protection for exposed outdoor installations.
Steel: Cold-rolled carbon steel provides a smooth fabrication surface but can still corrode if its protective coating becomes damaged.
Artwork: Vector artwork is preferred. High-resolution raster artwork should clearly represent the exact logo intended for fabrication.
Wall Type: Wall construction affects the required anchors, fasteners, and installation method. Use hardware appropriate for the completed sign and supporting structure.
Lighting Appearance: The visible glow will vary according to the wall color, texture, surrounding ambient light, LED color, and dimensional spacing.
Cleaning: Wipe the finished metal surfaces gently with a soft, damp cloth. Avoid abrasive pads, aggressive chemicals, and harsh solvents that could damage the powder-coated or clear-coated finish.
Give Your Logo More Depth and Visibility
A flat metal logo can create a clean professional display, but combining a raised logo, personalized backplate, and LED backlighting creates a more dimensional branded feature for spaces where your company identity is intended to command attention.
Choose your size, front logo color, backplate color, and LED lighting preference, upload your company artwork, and review your digital proof before your custom illuminated sign moves into production.
Not sure which colors, size, lighting option, or mounting configuration will work best for your storefront or office? Contact House Sensations Art with your logo, a photo of the intended wall, approximate dimensions, wall type, and preferred brand colors. The team can help you review the available options before fabrication.
For franchise locations, multi-location branding, corporate offices, retail rollouts, hospitality projects, or coordinated illuminated business signage, contact House Sensations Art for additional project options.
